Production equipment for microsystems. Interface between end effector and handling system1 Scope This International Standard specifies provisions for the interface between end effector and handling systems in production equipment for microsystems. It specifies principal deviations, tolerances and designations for manually and automatically changeable end effectors. The aim is to specify the end effector interface in three levels with an increasing degree of specification.

Designation of relief grooves

PD CEN/TR 15316-6-4 on the energy performance of buildings explanation and justification of EN 15316-4-1 is useful for:

Prefixes for binary multiples

Why should you use PD CEN/TR 15149-3 - Determination of the size distribution of particulate biofuels by the rotary screen method

BS 7020-19 on an ion-selective electrode method for the determination of the fluorine content of iron ores is useful for:

This document is also applicable to the microbiological examination of water where water is either used in food production or is regarded as a food in national legislation

Testing of OAs for multichannel use involves additional considerations

6 of ISO 230-1:1996

5 Preparation of test solutions

removal of snow and ice

note 2 to entry)

BS EN 1253-1 is the first part of BS EN 1253 and discusses trapped floor gullies with a depth water seal of at least 50 mm