Single Stage Vacuum Generators VG03 to VG 05Single stage vacuum generators VG 03, VG 03 LP and VG 05 LP This series of single stage vacuum generators, also based on the Venturi principle, can be supplied for optimal supply pressures of 4 or 6 bars. Thanks to their shape, they can be installed directly on the user device and used at the most suitable supply pressure, depending on the desired level of vacuum. They have different capacities and can be used in all gripping systems with vacuum cups,

The measurement method of our vacuum gauges is based on the principle of the Bourdon spring (Eugène Bourdon

com/en/wet-and-dry-vacuum-cleaners/m-280-wd/

DHB 1500 - Being Update Details upon request

these represent the best solution in terms of energy efficiency

Their function is to retain fine or impalpable dust impregnated with the filter oil

Small pneumatic suction pumps PA

the generator creates vacuum for use

Also available in the ATEX-certified version to suction flammable liquids and powered by compressed air

The foam rubber used for our cups can be provided in sheets or strips of the sizes indicated in the table

The vacuum generators on this page are based on the same Venturi principle of those previously described and provide the same technical performance

These pumps are powered with compressed air with a pressure ranging from 1 to 6 bar and have a blowing flow rate between 18 and 425 m3/h

This modular system allows increasing the number of independent vacuum units according to the requirements