S35A/BMOD Kestrel Inlet Air ThermocouplePart #: 1002339 Used On Where is it located: S35A BMOD Kestrel The return air thermocouple is located on the back of the drum under the drum drive motor Contents: 1 S35A BMOD Inlet Air Temp Thermocouple 1 Compression fitting assembly Parts Service Factor Life Expectancy: Life expectancy is dependent upon roaster usage. Symptoms indicating replacement needed include damage resulting from improper removal or usage, or inaccurate inlet temperature

Symptoms indicating replacement needed include difficulty with lighting a flame

the kit includes a yellow spade connector to convert the M12 style harness to work with this style thermocouple

below the S-Duct

This ignition wire is B Mod specific due to the Rams horn style connection to the bottom of the electrode within the burner

S35 Cooler Tray Wiper Replacement Kit

Held in New York

Load Line Removal Kit

Located in the plenum behind the loring cover underneath the green hopper

1 Quick Pull Ring 120mm

4-4"WC (CAB PRESSURE SWITCH) 1002242 1 Cyclone Green Bean Hopper Site Glass (Rectangular) 1009232 1 S7

and is visible through the cyclone sight glass

the electrode goes through the side of the cyclone and hovers above the burner