Tungsten carbide burr Blue-Tec coated WRC / HP-2 d1=10 / l2=20 / d2=6 / l1=65mmTungsten carbide burr Blue Tec coated WRC HP 2 d1=10 l2=20 d2=6 l1=65mm

low warpage hardened

- Reduction sleeves

Tungsten carbide burr uncoated WRC/ HP-6 d1=16 / l2=25 / d2=6 / l1=70mm

Tungsten carbide burr Blue-Tec coated ZYB/ HP-4 d1=3 / l2=14 / d2=3 / l1=100mm

Carbide Tipped Circular Saw Blade - Rip sawblade Alternate top bevel tooth with chip limitor 400x3

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance8

Collet 3 mm suitable for modell: KA75R

Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

For adaption from SK/ISO to PSC (ISO 7388-1 to ISO 26623-1)

DCONWS = 40 and DCONWS = 60:

solid carbide circular saw blade DIN 1838 B/ 40x1

Tungsten carbide burr uncoated ZYB/ HP-7 d1=8 / l2=20 / d2=6 / l1=65mm