99177 - SKF Speedi-Sleeve - Max. Shaft Diameter 45.09mmWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and

Medium 105mm - Bore Size Brass Cage Internal Clearance Greater Than Normal

HMSA10 seals like the 45X62X7 HMSA10V offer improved sealing performance through features like an optimized rubber outside diameter and spring-loaded sealing lips

This hm231140-90103 bearing is an imperial taper roller bearing

This 6312 2Z C3GJN SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance

The 27X47X7HMS5V is a single-lip radial shaft seal from SKF

This 20210-TVP bearing is a Open Type Barrel Roller Bearing with a glass fibre reinforced cage and a standard radial internal clearance

60 14 DU C3 Metric

The Bearing Insert in the UCP311-35 can be easily removed from the P311 housing

230 32 2CS5 K VT143 Light Series 160mm - Bore Size Sheet Steel Cage HNBR Contact Seals on Both Sides of the Bearing

This 62203 2RS1 C3 SKF bearing is a Sealed Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance

The NK5/12-TV-XL is a Light Duty Open Type

This LWHT25C1R1980T1HS2 is a high rigidity ball type series linear way with a rail length of 1980mm