RNA6913UU IKO Machined Needle Roller Bearing - 72X90X45MMThe RNA6913UU is a Standard Duty, Double Row Machined Needle Roller Bearing with an oil groove, an oil hole in the Outer Ring, and 2 Rubber Seals. This Bearing has no Inner Ring, meaning the Needle Rollers are mounted directly onto the shaft. As such, the Bearing has better running accuracy as it isn't affected by assembling an Inner Ring with the shaft. In caged Needle Roller Bearings like this one, the Needles are precisely guided by the Cage to

>3 MM - 93 20 WI CR DU H 25° Contact Angle Super High Precision Steel Balls Ultra Light Series 100mm - Bore Size Angular Contact

One Flange on Outer Ring Light 90mm - Bore Size Standard Design Steel Cage Internal Clearance Greater Than Normal

719 06 CD G A /P4A Series - SKF - Extremely Light Bore Size - 30mm 15 Degree Contact Angle Single Universal Light Preload Precision Rating

62 20 RSR Light Series 100mm - Bore Size Rubber Seal on One Side Normal Radial Internal Clearance

NU 10 38 MA Single row cylindrical roller with no flanges on inner ring Extra Light Series 190mm - Bore Size Single-piece machined brass cage Normal radial internal clearance

Loctite 5203 Low Strength Sealant 300ml Brand Type Size Material Safety & Technical Data Sheets

FRB 10 230 Locating Ring Inside Diameter Outside Diameter

This SF12 bearing is a Cast Iron Flange Bearing Unit

The NJ2322ECML/C3 SKF bearing features a cylindrical roller design

KMK 11 Lock Nut with an integral locking device Size

This 577-906a1 bearing is an imperial taper roller bearing

Medium Series 17mm - Bore Size Double Row without Filling Slots Metal Shields On Both Sides Glass Fibre Reinforced PA66 Cage (Polyamide Cage) Normal Internal Clearance Grease with a lithium thickener of consistency 3 to the NLGI Scale for a temperature range –30 to +120 °C