Epoxy Primer PPG Amercoat 240 One Gallon KitPPG Amercoat 240 Epoxy Primer One Gallon Kit Haze Gray or Off White PPG Amercoat 240 is the workhorse epoxy primer that I use at the Boat Crafters Shop almost exclusively. With its high build characteristics, this primer will build from 4 12 mils in thickness depending on your application method. I typically shoot one medium coat at a time building to 12mil if material thickness is required. The primer is very thick and will require at minimum a 2.

Manufactured in the USA with 88% post-consumer recycled plastic

Partial Sheets are only available in 48"x24" sections

My lead time to shipment depends on my current workload

All orders outside of those areas are priced based on the number of sheets ordered and the distance from our shop

This maintains the length of fibers along the torn edge

Its excellent sealing and build characteristics make it the preferred base coat before applying Awlgrip topcoats

5mm tip spray gun to shoot un-reduced

Each hatch is custom-made to your spec

75-ounce chopped strand mat is stitched to the back of the 17-ounce roving

Product Material List: Investment cast stainless steel

The cost to ship (1) sheet inside of Florida is about $30

Possible Uses: